Primol MCD

Primol MCD efficiently solve road dirt, asphalt and salt residues 
Primol MCD is used eg for cleaning the brush wash, 
high pressure wash, hand wash and engine cleaning. 
It is thixotropic and can also on vertical surfaces, therefore, 
be applied without it expires.

Application:

Mix Primol MCD with cold water. Application with a spray bottle 
like, or. 
Always test product compatibility on a small area.

The vehicle to be cleaned with Primol MCD Spray 
* if necessary the cleaning action with a brush or similar support * 
Let them act it a few minutes, 
then rinse thoroughly with water.

Dosage:

Vehicles 
1: 7 - 1:10 (10 - 14%) 
Industrial cleaning 
1: 3 - 1: 6 (16 - 25%)

IMPORTANT! 
The product does not apply to hot surfaces. 
Do not use in direct sunlight. 
Do not allow to dry on the surface. 
Storage: 
The product is sensitive to temperature, see safety 
stored in the original packaging at temperatures of between + 5 ° C to + 27 ° C. 
Information in paragraph 7.2 SDB

Signalwort:
Gefahr
Gefahrenhinweise:
H304 - Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein. H318 - Verursacht schwere Augenschäden.
EUH066 - Wiederholter Kontakt kann zu spröder oder rissiger Haut führen.

DATENBLATT